Pianos regularly make movers yearly list of items that are most often harmed. Grand pianos are especially troublesome. Practicing the following procedures for taking apart, cushioning and filling grand pianos will prevent damage, lower claims expense, and improve consumer satisfaction.
1) At least three people are needed to deal with a baby grand piano. If the child grand piano needs to increase or down stairs or if a full or concert grand piano requires to be transferred, a minimum of 4 individuals are required.
2) Always complete a precise and thorough inventory. It might be necessary or preferable to use a visual stock to effectively explain and show pre-existing damage.
3) As various parts are disassembled, please place all hardware in a properly identified parts bag and after that put the parts bag in a "Parts Box".
4) Get rid of the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a clean furniture pad.
5) Detach the lid by removing the hinge pins. Have a single person wiggle the lid, holding it opposite the hinge, while a second person works the pin loose. Please take care not to harm the wood with the pliers or with the pin itself. If necessary, cover the jaws of the pliers with a little cloth to assist prevent damage to the wood. Wrap the cover in a clean furniture pad.
6) Eliminate the prop that holds the cover open and wrap it in a clean furnishings pad. The prop has a hinge pin and remains in two pieces.
7) Get rid of the pedal assembly and cover it in a tidy furnishings pad. When removing the screws, please be careful not to drop the braces. As you deal with the piano, number the push-rods from left to right as "1", "2", and "3", by putting a piece of masking tape with the suitable number on each rod.
8) Pad the piano by putting a clean rolled furnishings pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to avoid it from flopping read review open while you manage the piano. Note: Please ensure that the surface area of the piano is dust-free before padding it.
9) Position a piano board and attach the straps so that it is ready to get the piano. The raised brace on the piano board ought to be at the keyboard end of the piano.
10) Remove the left front leg by placing someone beneath the piano at the left end of the keyboard. The other two people need to support the left front corner. The person below the piano must turn the keeping block so that the long end points far from the leg. The screws, if there are any, ought to then be gotten rid of. The "beneath" individual ought to then extricate the piano prior to in fact removing the leg. Make sure to have two people lifting the corner of the piano while the third individual gets rid of the leg. Note: Please make sure to note which legs were gotten rid of from which positions since some pianos have legs that are not interchangeable.
11) Place the piano on the piano board by reducing the "leg-less" end onto the click site board. Please be sure to lift the whole piano slightly while finishing this maneuver to prevent undue pressure on the staying, attached legs as the piano pointers. Be sure that the piano is focused snugly versus the brace at the end of the piano board.
12) Remove the 2 staying legs and wrap them in tidy furnishings pads. These legs are kept in place by a "essential and slot" plan. To eliminate the leg, slide it inward towards the center of the piano until it comes out of the slot.
13) Protect the piano to the piano board by bringing completions of the straps together and fastening them. Place folded burlap pads over the furnishings pads but under the straps to offer extra protection to the edges of the piano. To prevent the strap near the narrow end of the piano from slipping off, connect the loose ends of the 2 straps together.
14) To move the piano over a flat, level surface, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, utilize the piano board as a skid. After sufficiently padding the stairs for security versus house damage, place the keyboard end of the piano toward the bottom of the stairs. Attach a hump strap to the top end of the piano board to prevent the piano from slipping.
16) To pack the piano, leave it on the piano board and location it in a tier as the very first base product with the keyboard dealing with the wall of the preceding tier. The finest location to pack the cushioned cover is in between the piano and the preceding tier or in between the piano and the wall.
Although grand pianos represent a substantial difficulty, they can be moved without damage by utilizing typical sense and practicing the procedures noted above.